Sl V20h Keyence Pdf Download 24736.html sensuel licencier bagatelles footbal

(The total consumption of both transmitter and receiver is fixed.)In the case where the PNP output type cabl e is used, the condition is that OSSD stays in the OFF state.In the case where the NPN output type cable is used, the condition is that OSSD stays in the ON stateView Related Series Safety 100 A*3 Max2.5 (When operating distance is 3 m or more) Working distance 0.1 m to 9.0 m (detection height of 1,260 mm or l ess)0.1 m to 7.0 m (detection height of 1,400 mm or more) Response time (ms) ONOFF 11.4*1 12*1 12.5*1 13.1*1 13.6*1 14.2*1 14.7*1 OFFON 51.4*1 52*1 52.5*1 53.1*1 53.6*1 54.2*1 54.7*1 Light source Infrared LED (850 nm) Operation mode Turns on when no interruptions are present in the detection zone (excluding when the muting function is used) OSSD output Output 2 outputs each for PNP and NPNSL-C12LSL-C14LSL-C18LSL-C24LDimensions I/O Circuit Connection diagram Data Sheet (PDF) Other Models Downloads: Catalogs Technical Guides CAD Data Manuals Software Overview Downloads Downloads Catalogs Technical Guides CAD Data Manuals Software For Your Support Ask KEYENCE Price Inquiry Request Demo / Test 1-888-KEYENCE(1-888-539-3623) Home Products Safety Safety Light Curtains SL-V series Models SL-V20H View More Models Back to top Certified Models Privacy Terms and Conditions Terms of Use Supplying to KEYENCE Sitemap Battery Recycling Copyright (C) 2017 KEYENCE CORPORATION

Back to top Data Sheet (PDF) 100 A*3Max(The total consumption of both transmitter and receiver is fixed.)In the case where the PNP output type cabl e is used, the condition is that OSSD stays in the OFF state.In the case where the NPN output type cable is used, the condition is that OSSD stays in the ON stateIf using the NPN output with a cable length of 15 m or longer, and the load current consumption is 200 mA or more, the wire resistance must be 1.0 or less.*5 When used under ambient temperature between 45 to 55 C, use incandescent lamps (24 VDC, 1 to 3 W) or LED lamps (load current: 10 to 100 mA).*6 The current consumption of the transmitter increases by 10 mA and decreases on the receiver by 10 mA when the AUX output (red wire of the transmitter) and the EDM input (red wire of the receiver) are short circuited if the fol lowing additional condition is metCan be changed by using the connector cableCan be changed by using the connector cable.MaxWhen connecting the SL-V32H (32 beam axes), SL-V24H (24 beam axes), andSL-V12L (12 beam axes) in series, the response time of each unit is 10.3 ms, 9.2 ms, and 7.6ms respectively, and the response time (ON to OFF) is 10.3 ms + 9.2 ms + 7.6 ms = 27.1 ms.*2 When used under ambient temperature between 45 to 55 C, the maximum should not exceed 300 mA.*3 Applies to situations when power is either off or disconnected.*4 The wiring resistance between the OSSD output and the connected equipment (excluding the resistance of the cable) must be 2.5 or less to ensure operationsView Related Series Safety

International Belgium Nederlands English Deutsch Franais HomeMy KEYENCESign InRegister Careers +32(0)15-281-222 Products Solutions Downloads Support About Us Contact Us All Products Home Products Safety Type 4 safety light curtain SL-V series Models SL-V20H Safety Light CurtainSL-V series SL-V20H Main Unit, General-purpose Type, 20 Optical Axes Other Models Overview Downloads Downloads Catalogues Data Sheet (PDF) 360view (3D PDF) CAD Data Manuals View Details Dimensions I/O Circuit Connection diagram SPECIFICATIONS Select Language EnglishGermanFrenchDutch ModelSL-V20HDetection capability25 mmBeam axis spacing/Lens diameter20 mm/5 mmEffective aperture angleMax10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions Material Main unit case Aluminium Upper case/lower case Zinc die-cast Front cover Polycarbonate, SUS304 Weight Transmitter 200 g 270 g 330 g 390 g 450 g 510 g 570 g Receiver 205 g 275 g 345 g 405 g 465 g 525 g 585 g *1 When connecting the SL-V units in series, the response time (ON to OFF) is the sum of theresponse times of al l the individual SL-V units, but the response time (OFF to ON) is the sameas that of a singl e SL-V unit.e.g2.5 (When operating distance is 3 m or more) Working distance 0.1 m to 7.0 m Response time (ms) ONOFF 9.1*1 10.2*1 11.3*1 12.4*1 13.5*1 14.6*1 15.7*1 OFFON 49.1*1 50.2*1 51.3*1 52.4*1 53.5*1 54.6*1 55.7*1 Light source Infrared LED (850 nm) Operation mode Turns on when no interruptions are present in the detection zone (excluding when the muting function is used) OSSD output Output 2 outputs each for PNP and NPNWhen connecting the SL-V32H (32 beam axes), SL-V24H (24 beam axes), andSL-V12L (12 beam axes) in series, the response time of each unit is 10.3 ms, 9.2 ms, and 7.6ms respectively, and the response time (ON to OFF) is 10.3 ms + 9.2 ms + 7.6 ms = 27.1 ms.*2 When used under ambient temperature between 45 to 55 C, the maximum should not exceed 300 mA.*3 Applies to situations when power is either off or disconnected.*4 The wiring resistance between the OSSD output and the connected equipment (excluding the resistance of the cable) must be 2.5 or less to ensure operationsWhen connecting the SL-V32H (32 beam axes), SL-V24H (24 beam axes), andSL-V12L (12 beam axes) in series, the response time of each unit is 10.3 ms, 9.2 ms, and 7.6ms respectively, and the response time (ON to OFF) is 10.3 ms + 9.2 ms + 7.6 ms = 27.1 ms.*2 When used under ambient temperature between 45 to 55 C, the maximum should not exceed 300 mA.*3 Applies to situations when power is either off or disconnected.*4 The wiring resistance between the OSSD output and the connected equipment (excluding the resistance of the cable) must be 2.5 or less to ensure operations(The total consumption of both transmitter and receiver is fixed.)In the case where the PNP output type cabl e is used, the condition is that OSSD stays in the OFF state.In the case where the NPN output type cable is used, the condition is that OSSD stays in the ON statecapacitive load2.2 F (with a load resistance of 100 )Load wiring resistanceMax

Max2.5 *4Non safety-rel atedoutputAUXOutput with automatic PNP/NPN switching function, 50 mA max.Interlock-reset-ready outputAlarm outputClear/blocked outputState information output 1, 2Muting lamp outputIncandescent lamp (24 VDC, 1 to 7 W) or LED lamp (load current: 10 to 300 mA)*5 can be connectedInputEDM inputShort-circuit current 10 mAWait inputShort-circuit current 2.5 mAReset inputMuting input 1, 2Override inputProtection circuitReverse current protection, short-circuit protection for each output, surge protection for each outputApproved standardsEMCEMSIEC61496-1, EN61496-1, UL61496-1EMIEN55011 Class A, FCC Part15B Class ASafetyIEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE)IEC61496-2, UL61496-2, EN61496-2 (Type 4 AOPD)IEC61508 (SIL3), EN61508 (SIL3), IEC62061 (SIL3), EN ISO13849-1: 2015 (Category 4, PLe)UL508UL1998RatingPower voltage24 VDC +10 %, -20 %, Ripple (P-P) 10 % or lessCurrent consumption (mA)When the Centre indicator is ONTransmitter75*6ReceiverWhen the Centre indicator is OFFTransmitter70*6Receiver68*6Environmental resistanceEnclosure ratingIP65 (IEC60529)Overvoltage categoryIIAmbient lightIncandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.Operating ambient temperature-10 to +55 C (No freezing)Storage temperature-25 to +60 C (No freezing)Operating relative humidity15 to 85 % RH (No condensation)Storage relative humidity15 to 95 % RHVibration resistance10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directionsShock resistance100 m/s2 (Approx2.5 (When operating distance is 3 m or more) Working distance 0.1 m to 7.0 m Response time (ms) ONOFF 16.8*1 17.9*1 19*1 20.1*1 21.2*1 22.3*1 23.4*1 OFFON 56.8*1 57.9*1 59*1 60.1*1 61.2*1 62.3*1 63.4*1 Light source Infrared LED (850 nm) Operation mode Turns on when no interruptions are present in the detection zone (excluding when the muting function is used) OSSD output Output 2 outputs each for PNP and NPNModel SL-V12HM SL-V16HM SL-V20HM SL-V24HM SL-V28HM SL-V32HM SL-V36HM SL-V40HM SL-V44HM Detection capability 25 mm Beam axis spacing/Lens diameter 20 mm/5 mm Effective aperture angle Maxl oad current 500 mA*2 Residual vol tage (during ON) Max2.5 (When operating distance is 3 m or more) Working distance 0.1 m to 7.0 m Response time (ms) ONOFF 9.1*1 10.2*1 11.3*1 12.4*1 13.5*1 14.6*1 15.7*1 OFFON 49.1*1 50.2*1 51.3*1 52.4*1 53.5*1 54.6*1 55.7*1 Light source Infrared LED (850 nm) Operation mode Turns on when no interruptions are present in the detection zone (excluding when the muting function is used) OSSD output Output 2 outputs each for PNP and NPN

Model SL-V40H SL-V44H SL-V48H SL-V52H SL-V56H SL-V60H SL-V64H Detection capability 25 mm Beam axis spacing/Lens diameter 20 mm/5 mm Effective aperture angle Max2.5 V (with a cable length of 7 m) Leakage current Max2.5 V (with a cable length of 7 m) Leakage current MaxWhen connecting the SL-V32H (32 beam axes), SL-V24H (24 beam axes), andSL-V12L (12 beam axes) in series, the response time of each unit is 10.3 ms, 9.2 ms, and 7.6ms respectively, and the response time (ON to OFF) is 10.3 ms + 9.2 ms + 7.6 ms = 27.1 ms.*2 When used under ambient temperature between 45 to 55 C, the maximum should not exceed 300 mA.*3 Applies to situations when power is either off or disconnected.*4 The wiring resistance between the OSSD output and the connected equipment (excluding the resistance of the cable) must be 2.5 or less to ensure operationsOperating ambient temperature -10 to +55 C (No freezing) Storage temperature -25 to +60 C (No freezing) Operating relative humidity 15 to 85 % RH (No condensation) Storage relative humidity 15 to 95 % RH Vibration resistance 10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directions Shock resistance 100 m/s2 (ApproxCan be changed by using the connector cable.Max 87c6bb4a5b