Bj 10sx driver windows 7

When printing text files, prints 2 lines on platen before feeding next sheet This problems arises when printing simple text files from dos where no page end or formfeed indication in the file. If the paper always feeds in at an angle.

They add hundreds of new drivers to our site every day. Browse the list below to find the driver that meets your needs. Choose from the list below or use our customized search engine to. Then install the driver from.

BJ-10E - Uploader: Date Added: 9 November 2015 File Size: 15. Remove all shipping tape and any styrofoam packing material used to protect the printer during shipping.

Used for high quality overhead transparencies. Lightly coated, water resistant everyday usage paper. Known Issues Microsoft Word 1. Print head moves, but nothing prints This usually occurs when a new printer cartridge has been inserted. Run the print head cleaning process 3 times, this should always be done when a new cartridge is inserted. Place a piece of kitchen towel over the print head and blow in the hole located on the side of the print head. This should force ink through the print head onto the towel. Dab the 10sx with a windows cloth to clear the blockage. Re-seat the cartridge to ensure the connections are correct. Ensure that the printer is switched off correctly. Use the windows on the printer, not the wall socket. This will ensure the print head is closed correctly and does not block up or dry out. The printer does not print There are many reasons why it may not print. Listed below are some of the tests you can perform. Run a self test to establish printer is a working unit. If this does not work the printer is faulty. This should then print to the printer. Test the printer on another computer. If it does print it is a software problem. Test the printer on another computer. Ensure that the printer is plugged in and connected correctly. Paper error light comes on when switching on printer Take any paper out of the printer and start the printer again. Insert the paper and press on line. Ensure the paper is inserted correctly. Far enough over to the left if no sheetfeeder attached over the right if the sheetfeeder attached. Sheetfeeder does not feed correctly This could be either hardware or software. If the paper always feeds in at an angle. Check they are feeding the paper in correctly. If they are there is a hardware fault. Check the printer emulation, Check the paper source is set for sheetfeeder and paper size is set for A4. The chances are it is a software problem. No power on the printer. Needs to be depressed for a couple of seconds to ensure powers on correctly. When driver text files, prints 2 lines on platen before feeding next sheet This problems arises when printing simple text drivers from dos where no page end or formfeed indication in the file. If the error persists replace the battery. Blinks Off On Continously Logic Card error Logic 10sx error Blinks Off Blinks 5 Battery fault Try recharging 2 or 3 more times. If the error persists replace the battery. If problem persists, change ink cartridge. New Ink Cartridge Does Not Print - Clean Print Head. Dirty Output - Adjust paper thickness adjustment dial to appropriate position.