Nighthawk X6 AC3200 Tri-Band WiFi Router Cable Connections

When you purchase a new Nighthawk X6 AC3200 Tri-Band WiFi Router for your network, you will need to make some advance cable connections for these devices. Using cable connections for Netgear wifi router device, you can setup these devices for your network. Using routerlogin net start 192.168.1.1 login page you can access web browser setup for your device and make other advance settings.

Here are the Steps to Make Cable Connections for Nighthawk X6 AC3200 Tri-Band WiFi Router

1. Remove power supply for your Netgear wifi router device, modem device and the computer that you are using.
2. Using Ethernet cable connect your Netgear wifi router device to the modem device. you can use the LAN port at the back side of your devices.
3. After that plug the power supply once again to your device and wait till the power LED is solid green in color.
4. From the back side of Nighthawk X6 AC3200 Tri-Band WiFi Router device you can make power ON and OFF for your devices.
5. You can then have a look at the cable connections between your modem and wifi router devices. These router devices must also be connected using cable connections. Check the right way for adding a new device to the wireless network.
6. You can then access routerlogin net start 192.168.1.1 IP address login page from a computer device. this computer device must also be connected using cable connections or either using wireless connections.

These are the  steps that you will follow and then you can make the cable connections for your Nighthawk X6 AC3200 Tri-Band WiFi Router device. when you access router login page from your device, you can easily change the wireless settings for your device.