How to fix canon printer error 5100

Canon Printer error is one of the most annoying issues which very badly hamper the entire scanning system. The system also fails to print or scan a copy due to both internal and physical issues with the Canon printer. So, getting across the canon printer error 5100 while you're trying to scan any documents is quite obvious. It also creates an issue when scanning multiple copies with its multifunctional units. Besides this, the output is not generated, and after a certain time, the Canon printer stops reacting. However, in this content, we'll talk about the effective solutions that will permanently overcome this annoying issue.

Important issues Behind the error of the Canon Printer:

Some of the common problems very often become the crucial factors that cause the Canon Printer mistake. Let's know the main and possible reasons which are effectively responsible for this annoying problem.

• If the debris, packing materials are found inside the Canon printer panel, then they appear as the 5100 Printer Error Code.
• If the ink tank is not properly seated then you can very often face the issue of scanning the Canon printer.
• The Canon Printer Error 5100 causes the issue of paper jams and the presence of tiny metal objects inside the ink cartridges.
• Another issue that prevents scanning of the documents is the presence of clogs inside the scanner encoder picture.

Resolve Canon Printer Error Code 5100 With Easy Technical Troubleshooting Steps 

There are many technical ways you can include to effectively fix the canon printer error 5100. In fact, it helps boost printer performance and keeps your scanner running for a long time to come. Here, we will address some of the effective solutions that will help to quickly get rid of any Canon printer problem.

Method 1: Remove Printer Clogs

Overcoming the irritating problem is one of the very initial methods. You can quickly fix the printer scanning problem by removing the clogs.

Disconnect all printer-connected cables and wires and switch off the printer.

Now, wait a few minutes, and check the printer's inside. Test whether or not the garbage, dirt, or any metal objects, etc appear in the input tray. If any clogs found inside the Canon printer, then use non-corrosive solutions to clean it and let it dry.

Turn on the Canon printer error 5100 after completing the printer clean process, and try to take the printout to check if the scanning problem has been resolved or not.

Method 2: Fix Paper Jam Issue

By taking out the torn papers and debris from the input tray, you will remove the paper jam problem.

• Switch off the Canon printer by unplugging the power outlet cables and wires from the unit.
• After that, remove the cover and ink cartridges from the printer input tray. Now, check if any paper is or is not stuck inside the output tray. In addition, check the production tray for the possibility of broken paper inside it.
• In addition to that, check whether or not the paper alignment is set correctly. In addition, ensure that the paper size is set correctly and that the A4 size papers are perfectly inserted into the input tray.
• Finally, close the cover and test whether or not the paper jam problem has been resolved, and whether or not the Canon Error Code 5100 still exists.

Method 3: Clean the Timing Strip

• First, clean the damp cotton balls on the timing strip and wipe it with the dry cloth.
• Now, check the drive belt and its bottom section to see if any clogs and tiny metal objects on the black strips are found, clean it immediately.
• Likewise, clean out the thin plastic strip running across the printer's wide front area. Finally, turn on the Canon printer, and effectively fix the printer error.

Method 4: Lubricate the Printer Head

• Make sure the printer's properly switched off. Use the purge mechanism now and lubricate the head of the printer. The white grease must be used and the sliders properly cleaned.
• Next, remove the right printer panel and apply purge technology to make the tray sufficiently lubricated.
• Finally, start scanning, and test whether or not the Canon printer problem has been resolved.

Method 5: Reset the Ink Absorber

• Switch off the Canon printer and wait 2-3 minutes before turning off the power lamp.
• Press and hold the Resume button from the printer monitor after a couple of minutes (triangle symbol within a circle). Keep the power button at the same time, and wait until the monitor displays the green light.
• Now release the Resume button by holding the Power button together, and press it twice. The light becomes amber and then it becomes green again.
• Activate the power button and at least four times click the Resume button.
• Next, reset the Counter Absorber and press the Power button again after verifying the selection action.
• Instead shut off the Canon printer, and successfully turn it on again.
• Eventually, try to take a printout and still determine whether or not you obtain the canon mx430 printer error 5100.

Method 6: Reset the Ink Cartridges

• First, switch off the Canon printer Error 5100 and unplug the device from the power outlet.
• You could plug it again after waiting a few minutes and click the ON / OFF Power button from the Printer panel.
• Keep the ON / OFF button down and press the Stop / Reset button twice. Remove the power button and continuously hold down the Reset key to execute the factory reset program.
• Hit the right-arrow button until the LCD display displays Shipping mode 3. Tap the Ok button to pick it.
• After that, you can see the message that says, "Without Cleaning" and immediately hit the Stop / Reset button after watching. This phase aids in scanning a test sheet.
• Take both of the ink cartridges out and close the cover properly. Now properly clean the ink tanks with chemical solutions that never react within the printed materials Next, plug the printer's power cable again, and press the ON / OFF button.
• Wait until the "Replace Cartridges" message appears on the display and put the ink cartridges back in the correct position.
• Finally, check whether or not the Canon printer can recognize the printer, and attempt to take a hard copy after checking. This approach will fix the problem with the Canon printer and keep your scanner running for a long time.