Skip to main contentdfsdf

Home/ jkofoed47werner's Library/ Notes/ Tips to Help You Install Led Projector Headlight in Chevrolet Cruze

Tips to Help You Install Led Projector Headlight in Chevrolet Cruze

from web site

Chevy Cruze Tuning hub

Today we are going to show you the guide for the Chevy Cruze projector headlight installation. Before we begin you'll require a 10 millimeter socket panel popper and the t15 Torx driver. Now, let's begin with opening the hood. Step by step to show you the following:

- Remove the four plastic retainers protecting the fascia, then take out the two 10 millimeter bolts on either side of the grill

- Now take out the three t15 Torx screws protecting the fender liner, remove the 8 to 15 Torx screws securing the fashio from listed below

- Next, go ahead and unseat the front bumper fascia, disconnect the side marker and fog lamp utilizes then remove the fascia

- Remove the four 10 millimeter bolts securing the headlight, unseat the headlight.Disconnect the headlight harness then detach the turn signal harness, locate your Hid projector headlight


- Reconnect the turn signal harness to the headlight, reconnect the headlight arnis seat the projector headlight.

- Reinstall the 4 ten-millimeter bolts that protect the headlight, reconnect the side marker and fog lamp harnesses seat the front bumper fashio.

- Reinstall the four plastic retainers to secure the fascia, reinstall the two 10 millimeter bolts on either side of the grill.

- Then re-install the eight t15 Torx screws to protect the fascia from below.
And also there is one more good option, you must check out this link to learn more about it.

- Last reinstall the 3 t15 Torx screws securing the fender liner.

Now simply close the hood and you're done. Before you drive your vehicle on the road, you need to check your headlight to ensure it connects all the wiring and works well.

jkofoed47werner

Saved by jkofoed47werner

on Feb 19, 20