A Step By Step Guide to Install Chevrolet Cruze LED Backup Light
from web site
Chevrolet Cruze just replaced the Daewoo-based Lacetti Touring cars in the WTCC last season. And in the British Touring Car Championship (BTCC), the Chevrolet Cruze group won seven races with driver Jason Plato. This car is great and worth to have. Today we're going to replace the reverse lights and the plate lights in my 2011 Chevy Cruze. It's a quite easy install, so I'm gon na show you men how to replace these lights.
The first thing is to open your trunk and then find yourself a flathead and Phillips head screwdriver. Utilize a flathead screwdriver to take it and pop open the two little caps that cover the screws that are holding the brake light assembly into the vehicle. Unscrew the two screw that is holding the head or the brake light rather into the vehicle.
Take a firm hold of the brake light, wiggle it out of its position. The reserve light is on the left, detach the wires to the vehicle. Take the light out and twist it counterclockwise till it clicks and after that pull it straight up. take the bulb and pull it right out of its socket. take the 1156 LED bulb, clip it back into where the incandescent bulb came out of and then re-install it the same way and turn it clockwise to lock the bulb into location.
Check out F1 Automotori for yourself if you are interested in more tips.
Reinstall the brake light back into the car, merely realign the light back up, push it straight back into the car, reinstall the two screws that hold it into location and then proceed and shut the little screw caps.
The first thing is to open your trunk and then find yourself a flathead and Phillips head screwdriver. Utilize a flathead screwdriver to take it and pop open the two little caps that cover the screws that are holding the brake light assembly into the vehicle. Unscrew the two screw that is holding the head or the brake light rather into the vehicle.
Take a firm hold of the brake light, wiggle it out of its position. The reserve light is on the left, detach the wires to the vehicle. Take the light out and twist it counterclockwise till it clicks and after that pull it straight up. take the bulb and pull it right out of its socket. take the 1156 LED bulb, clip it back into where the incandescent bulb came out of and then re-install it the same way and turn it clockwise to lock the bulb into location.
Check out F1 Automotori for yourself if you are interested in more tips.
Reinstall the brake light back into the car, merely realign the light back up, push it straight back into the car, reinstall the two screws that hold it into location and then proceed and shut the little screw caps.
