Things to Consider Before Calling a Local Heating & Cooling Contractor for an Emergency Concerning your Heating System

It's a freezing winter day and you get up to a cold house. You quickly find that the heater isn't working! Your very first thought is to require emergency heating system repair.

Before you get your phone, you can take a couple of simple actions to see if you might have the ability to deal with the problem by yourself. This might help remedy the issue quicker and without the cost of a possibly unneeded emergency situation heater repair call.

1. Check your thermostat.

- Make certain that the thermostat is on and set to "heat." This sounds apparent, but you wouldn't think how many service calls take place because the house owner didn't know that somebody (like a guest or child) changed the settings!

- If your thermostat has a fan setting, set it to "automobile" http://www.bbc.co.uk/search?q=hvac instead of "on." Otherwise, the fan may blow constantly even when the air isn't being heated.

- If the space temperature level is lower than the thermostat setting, try adjusting the setting up a few degrees to see if the heating system kicks in.

2. Make certain you have power to the heating system.

Even if you have a gas heating system, a disruption in electric power will interrupt your furnace from producing heat. You may have a breaker that has tripped.

If that holds true, you can reset it by turning the circuit all the way off and then on once again. If the circuit immediately breaks once again, call a professional.

3. Inspect your air filter.

An air filter that is extremely clogged up will not allow the air to be heated up effectively. It may trigger your heater to overheat and shut down.

Eliminate the filter and hold it versus the light. Can't see any light through it? Change it. https://www.pressadvantage.com/organization/furnace-repair-calgary We recommend checking your furnace filter every month and changing as needed.

4. If you have a gas heater, make sure the gas supply is on.

If you have actually had actually any repairs done recently, somebody might have turned off the gas supply valve and after that forgot to turn it back on. Or, the gas company might have closed down the gas lines for maintenance. A quick check with the gas business is a good idea if you believe this might be the case.

- Inspect the gas valve at the gas company's meter.

- Check the gas valve on your heater. Your furnace's gas valve is on when the handle is inline (parallel) with the pipe. If it's off, the manage will be perpendicular to the pipe.

If you smell gas, switch off the supply and right away call a professional.

5. Inspect the ignition source or pilot light.

Most modern-day heaters have actually an igniter paired with a flame sensing unit rather than a physical pilot burner. Both of these can wear out and require repair work. In truth, ignitor and flame sensing unit problems are some of the most typical heater repair work we experience.

If you have an older heating system, your system might have a physical pilot burner. A draft or interruption in gas service can trigger the pilot burner to go out. If your pilot light is out, and you've already confirmed that you have a safe gas supply, try relighting it according to your owner's manual. (This is generally done with a fireplace match or long barbeque-style lighter.).

If you're not comfy with this, or the pilot light won't stay lit, call a specialist.