Installation of Jockey Wheel Trailer

A jockey wheel or trailer jockey is an easy-to-use, self-contained device primarily created for lowering and raising the coupling end of a trailer and for stablekeeping the trunk of the trailer while towing it to and from another vehicle. It is used to reduce the stress on the trailer's tow-line. A wheel jack may be the device that raises and lowers the trailer, using a hydraulic system. A jockey wheel acts because the "punch" arm by raising and lowering the trailer using its crankshaft. The trailer is then moved along with the crankshaft of the trailer by the towing arm. Jockey wheels could be either directly or indirectly driven; the latter type of wheel is more often used.

There are various forms of jockey wheels, each suitable for particular circumstances. There are basically two types: straight shafts and counter-rotating shafts. They differ in terms of design, size, kind of material used and the direction they are fitted. The most frequent forms of trailer jockey wheels are the straight shafts and the counter-rotating ones. The straight shafts include a single large counter-rotating arm that's placed in the center of the wheel, that includes a cross bar attached at another end.

heavy duty jockey wheel are connected by a large numbers of smaller arms which are fitted at the ends of the main body. All the arms have a cross bar attached so that the upper surface of the wheel can be lifted by it easily. On the other hand, the counter-rotating ones feature an arched design with a number of vertically mounted clamp brackets around the outside of the arm. They are fitted over the trailer jockey wheels and engage the wheels at their ends. Clamp brackets are also found in tandem with the jockey wheels to lock the trailer securely in place.

Mounting brackets, subsequently, are made out of different materials. Some of them are made out of steel, while others are created out of aluminum or plastic. The former is more preferable since it is more durable and is light-weight; while the latter could be cast, but is comparatively expensive. It is important to choose the mounting bracket which will work best with the trailer. However, all jockey wheels and mounting brackets are not too difficult to install on trailers of any sort, irrespective of the kind of vehicle they're destined to be utilized on.

The next phase entails mounting the wheel on the trailer, where it'll engage the trailer's winch system and the cable ties. At this stage, installing windshield or roof shingles will come into the picture. Next, the cable will run from the winch to a cable trimmer to the wind shield and finally to a cable cutter to perform the job.

Once installed, it is advisable to practice driving the vehicle minus the load on it for a few days to ensure that the device is in perfect working condition. Alternatively, when going over rough and uneven surfaces, it's important that you utilize pneumatic tires as they offer better traction on soft and muddy ground. Apart from using the appropriate jockey wheel on the trailer, it is also important to make use of a jack to raise the vehicle to a working level. Make certain that the vehicle is raised using the right method - usually utilizing an extension ladder - and is maintained properly in order not to cause damage to the vehicle or its components when raising it. Finally, make sure you drive the automobile slowly and cautiously over the rough surface, taking care never to step on the gas or the brake pedals.