HP LASERJET P4014, P4015, P4515 PRINTER REPAIR

HP LASERJET P4010, P4014, P4015 , P4515 PRINTER REPAIR

HP Laserjet P4014 Prints as high as 45 prints per minute on 8.5 x 11 size media
HP Laserjet P4015 Prints as high as 52 prints per minute on 8.5 x 11 size pages
HP Laserjet P4515 Prints as many as 62 pages per minute on Letter size pages

Supplies (Toner Cartridge) Part Numbers

HP 64A - (CC364A) Black LaserJet Toner Cartridge - 10,000 printed pages yield
HP 64X - (CC364X) Higher Yield Black LaserJet Toner Cartridge - 24,000 pages printed yield

Preventative Maintenance Kits
CB388A (110V) Kit Preventative Maintenance
CB389A (220V) Kit Preventative Maintenance
Each preventive maintenance kit may be a supply unit, together with its expense will not protected under the warranty or virtually all long term warranty

HP Laserjet P4014, P4014, P4515 Printer Service

Enjoy reliable, fast, and cost-effective black-/-white printing for ones Network Printing

Resilient productivity
Along with document printing speeds of as many as 62 pages printed per minute along with a 540 MHz processor, the HP LaserJet P4014, P4015, P4515 Printers Repair can help your workgroup perform at excellent proficiency. Receive continuous results and optimum functionality with the HP Laserjet P4515 most modern innovations in toner technology. Unbelievable HP (Hewlett Packard) credibility indicates stress-free printing which rises to the needs of your work place.

Convenient-to-use
Control your HP Laserjet P4014, P4015, P4515 rinter minus guidance from Department IT. HP Laserejt P4014, P4014, P4515 Printer installation and problem research are a no brainer together with Show-Me-How attributes on the contrail panel display.

HP Laserjet P4014, P4015, P4515 Error Code

13.01.00 Jam in Tray 1
The Manual Feed Tray 1 pickup roller \ solenoid could not be performing adequately.

13.03.00 Jam in Tray 2
The media feed path may have an impediment, or the Tray 2 solenoid might not be functioning correctly

13.20.00 JAM INSIDE
Document has not moved past a various media feed sensor. is usually one of the appropriate destinations.
REAR DOOR, TRAY 2, TOP COVER, DUPLEXER

1. Replace paper in Tray #X, and afterwards employ the paper path test to drive paper. Determine feed separation roller rotates.
2. Inspect the paper feed path and make sure no pages are hindering the paper path.

50.Z FUSER ERROR For help press ?
fuser error has developed. The values for Z are detailed underneath.

50.1 - Low temperature fusing assembly
50.2 - Warm-up procedure fixing assembly
50.3 - High temperature Fuser
50.4 - Fuser is defective
50.5 - Unreliable fuser (verify fusing assembly model)
50.6 - fusing assembly Open
50.7 - Device Pressure Release Failure
50.8 - Fuser temperature range lower
50.9 - higher Fusing temp

1. Power off and Power on the product to establish if the malfunction is consistent.
2. Determine that the correct fuser model is present in the HP Laserjet P4014, P4015, P4515.
3. Determine that the correct voltage fuser is being utilized in the product.
4. Examine that the fusing assembly is tightly seated in the HP Laerjet P4515 chassis.
5. Reseat the fuser, and hear for a snap within the end of the fusing assembly when you place into the HP Laserjet P4014, P4015, P4515.
6. Check the fusing assembly connections, right at the front of the fusing assembly, and the connectors on the HVPS (High Voltage Power Supply) PCA. Search for bent pins or debris. Cleanse or align the pins if needed.
7. If the problem persists, Contact Printer Repair Experts Customer Care to schedule an onsite HP Printer Service (888) 276-4666.

51.YZ ERROR To continue turn off then on
A laser/scanner defect has happened.

1.Restart the HP Laserjet P4015 to discover if the error is continues.
2. If the problem continues, Contact Printer Repair Experts Customer Care to schedule an onsite HP Printer Service (888) 276-4666.

60.ZZ ERROR
An problem has taken place while the product was trying to lift up the tray selected by ZZ.

1. Open the paper cassette tray, and then take out the media.
2. Open each guides and look for any torn pieces of paper or external elements inside the cassette tray.
3. Replace the paper, and then shut the paper cassette tray.
4. Power cycle the HP Laserjet P4014.
5. Eliminate nearly all of the paper from the tray aside from for a small amount of pages and reinstall the paper cassette tray into the HP Laserjet P4015. Concentrate for the sound from the lift motor lifting the paper stack. In addition, examine if the document level indicator moves around the front of the printer's paper tray.
6. If the problem carries on, Contact Printer Repair Experts Customer Care to schedule an onsite HP Printer Service (888) 276-4666.