How to Clean Laminate Countertops - DIY Fundamentals Explained
from web site
Some Known Factual Statements About How to DIY Laminate Countertops (It'll Save You SO Much
Beginning with the correct substrate creates an excellent structure for the countertop. Particleboard has a uniform, clear surface perfect for accepting the contact cement and leaving a smooth finish. Unfortunately, it does not come any thicker than 34 inch, which isn't enough for a counter top. You'll require to double up at the edges to produce a 1-inch face and raise the counter greater.
However, he makes certain to paint the underside of any counter that will sit over a dishwashing machine, cleaning machine, or clothes dryer with a thick coat of primer to secure against moisture. Pasting Related Source Here to the particleboard is the trickiest part of constructing a counter. Two surfaces covered with contact cement bond the minute they touch.
" Due to the fact that when it's stuck, it's stuck." Separating the two surface areas with dowels will provide you the opportunity to line everything up prior to you adhere the parts. There's a sequence to the way you laminate any counter in order to hide noticeable edges. The side edges go on first, then the front edge, and lastly the top.
The smart Trick of 10+ Beautiful kitchens with Laminate Countertops – The That Nobody is Discussing
Matching laminate edges is very challenging, which is likewise why you must prepare for as few joints as possible; if they are necessary (as with an L-shaped surface, like the one revealed here), your best option is to laminate two pieces separately, then join them. You can likewise choose to make a backsplash piece, which connects to the back of the counter before you mount the entire piece to the cabinets or the wall.
Cut 4-inch strips of particleboard to line the underside of each edge. Glue and screw the strips to the sheet with 1-inch screws. Make sure the edges are completely flush. If you will be linking two countertop areas, size and organize the strips on one piece to extend beyond the end of the sheet and fit under the nearby piece (see introduction).
Dry-fit the counter top sections before laminating them, and make sure pieces fit tightly. Sand the seam with 100-grit paper to fix any mismatches. To make a really tight joint between two particleboard pieces, back-cut the end of one piece by tilting your circular saw blade to 5 degrees. Cut the laminate Carefully unroll the laminate and lay it on a flat surface area, faceup.
