How to Paint Laminate Countertops - HGTV

Examine This Report on DIY Soapstone Countertops Using Paint — Simplicity in the

Still, lots of houses still sport Formica counters or cabinets in yesterday's colors and patterns. Don't desire to do it yourself? Secure This Author , no-commitment estimates from professional painters near you. While upgrading the color of Formica with fresh coats of paint can be a bit lengthy, it isn't especially difficult, even for a beginner to the do-it-yourself scene.

This in-depth guide on how to paint Formica will walk you through transforming your kitchen or restroom from ho-hum to wow. Tools & Products, How to Paint Formica, Whether you prepare to paint Formica counters or cabinets, safeguard the surrounding areasfloors, namely, however likewise lower cabinets if painting countertops or countertops if painting upper cabinetsand any close-by components using drop fabrics held in location by painter's tape.

If painting a Formica counter top, tape off the sink, the backsplash, walls that edge the counter, and the lower cabinets. If painting cabinets, tape off surrounding walls (and, possibly, hinges if you aren't planning to unscrew them). If you're painting Formica cabinets, get rid of manages or knobs from doors and drawer fronts.

How to Paint Laminate Countertops - HGTV

Indicators on Countertop Paint - Walmart.com You Should Know

While it is possible to paint cabinet doors while in place, it can be much easier to eliminate them and lay them flat throughout the painting process. One pro suggestion: If you do eliminate the doors and drawers, ensure to mark each with their area on the back or inside so each will be easy to replace them in their correct area when you're ended up.

Follow with a clean, water-soaked rag to get rid of any last traces of grease, and after that clean the laminate dry with a tidy towel or rag. Secure your eyes, skin, and lungs from airborne laminate dust with goggles, gloves, and a dust mask. Then, utilize 120- or 150-grit sandpaper or a sanding block to scuff the glossy surface.

Vacuum or use a tidy rag to remove all traces of sanding dust so that you can inspect for imperfections. Then, fix any little holes, scratches, or cracks in the Formica surface area with epoxy putty, spreading the putty as efficiently as possible with a putty knife. Let the putty dry for the amount of time recommended by the maker, and after that lightly sand it until it blends in with the rest of the surface area.