Safety Precautions When Using Hydraulic Cylinders - Enerpac Blog

Tips for Yearly Hydraulic Cylinder Maintenance Things To Know Before You Get This

Hydraulic cylinder malfunction is something that everybody operating heavy equipment with a hydraulic system recognizes with. There are many reasons to why a hydraulic cylinder or its elements could malfunction. One really typical reason you need hydraulic cylinder service is that the rods in the cylinders are bent.

This relatively basic problem could be triggered by many factors and might likewise trigger a series of severe concerns if left unattended. Lot of times, flexing rods are trigger by making mistakes that are too little to appear when troubleshooting the production but that cause damage when the rods are positioned in heavy machinery.

3 THINGS YOU CAN DO TO PREVENT HYDRAULIC CYLINDER FAILURE

Another common factor that causes the rods to flex is that you're running with cylinder rods that are made from insufficient material. Difficult chrome rods are generally resilient adequate to not bend, however might often crack. Also, if the rods haven't been altered in a while, then the chrome might soften and trigger the rods to bend.

A Biased View of How to deal with bent hydraulic cylinder rods

This could be an existing condition in the cylinder from the start. For You Can Try This Source , you need to make certain to inspect the mounting of the rods even if they are brand name new. Make certain the hydraulic cylinder isn't making any extreme noises while operating and that the rods aren't showing any indications of wear.

A breaking seal might trigger leakage in the cylinder, which would squander hydraulic fluid and shorten the life length of the cylinder. In severe cases, it might simply snap, putting your machine to a full stop while you're operating it, which could be very unsafe under the wrong scenarios. A simple way to avoid dangerous effects of bent rods is to determine the straightness of the rods whenever you are fixing or examining your cylinder.

Hydraulic cylinder bent rods triggered by side loads can be a huge issue when equipment starts to stop working. Side loads happen when unequal pressure isn't centered on the piston rod. They are the most common reason for failure of hydraulic cylinders that would normally last for many years. The stress they cause can lead to many problems, including bent tubes, seal failure, piston rod wear, and in severe cases flexing of the rod.