Skip to main contentdfsdf

Home/ copelandkors's Library/ Notes/ Hazardous Waste - DEQ - ADEQ Fundamentals Explained

Hazardous Waste - DEQ - ADEQ Fundamentals Explained

from web site

hazardous waste disposal codes medical corrosive material

Requirements for Hazardous Waste Generators in MichiganEPA Hazardous Waste Codes: Quick Reference Pocket Guidebook: 40 CFR § 261 2020, US Environmental Protection Agency: 9798634612867: Amazon.com: Books


List Of Waste - EWC codes - Pure Planet Recycling for Dummies


F003 The following invested non-halogenated solvents: Xylene, acetone, ethyl acetate, ethyl benzene, ethyl ether, methyl isobutyl ketone, n-butyl alcohol, cyclohexanone, and methanol; all invested solvent mixtures/blends including, prior to use, only the above invested non-halogenated solvents; and all spent solvent mixtures/blends including, before usage, several of the above non-halogenated solvents, and, a total of 10 percent or more (by volume) of several of those solvents noted in F001, F002, F004, and f005; and still bottoms from the recovery of these spent solvents and invested solvent mixtures.


S.INo233/2015 - European Union (Properties of Waste which Render it  Hazardous) Regulations 2015.Hazardous Waste Codes [40 CFR 261.33] - Environmental Resource Center


F005 The following invested non-halogenated solvents: Toluene, methyl ethyl ketone, carbon disulfide, isobutanol, pyridine, benzene, 2-ethoxyethanol, and 2-nitropropane; all invested solvent mixtures/blends including, prior to use, a total of 10 percent or more (by volume) of one or more of the above non-halogenated solvents or those solvents noted in F001, F002, or F004; and still bottoms from the healing of these spent solvents and spent solvent mixtures.


F007 Used cyanide plating bath services from electroplating operations. F008 Plating bath residues from the bottom of plating baths from electroplating operations where cyanides are utilized at the same time. F009 Spent removing and cleaning up bath solutions from electroplating operations where cyanides are utilized in the process. Read This from oil baths from metal heat treating operations where cyanides are used while doing so.


The 5-Minute Rule for Waste Classification - Environmental Protection Agency


F012 Quenching drainage treatment sludge from metal heat treating operations where cyanides are used in the procedure. F019 Wastewater treatment sludge from the chemical conversion covering of aluminum except from zirconium phosphating in aluminum can cleaning when such phosphating is a special conversion covering procedure. F020 Wastes (except wastewater and spent carbon from hydrogen chloride purification) from the production or making usage (as a reactant, chemical intermediate, or part in a creating process) of tri- or tetrachlorophenol, or of termediates used to produce their pesticide derivatives.


F021 Wastes (except wastewater and spent carbon from hydrogen chloride purification) from the production or making usage (as a reactant, chemical intermediate, or component in a creating process) of pentachlorophenol, or of intermediates utilized to produce its derivatives. F022 Wastes (other than wastewater and invested carbon from hydrogen chloride purification) from the manufacturing use (as a reactant, chemical intermediate, or element in a creating procedure) of tetra-, penta-, or hexachlorobenzenes under alkaline conditions.


copelandkors

Saved by copelandkors

on Mar 10, 22